So you stripped the plug? Did you use the correct size socket?

Sign up, and you can customize which countdowns you see. Sign up

Report problem with this ad

Feb 1, 2025
10:16:09am

Zak All-American

So you stripped the plug? Did you use the correct size socket?

If it is stripped, you might need to CAREFULLY drill it out at this point.

Report problem with this ad

Zak

Previous username: ZShaners
Bio page: Zak
Joined: Sep 25, 2007
Last login: Mar 6, 2025
Total posts: 15,168 (3,159 FO)

Report problem with this ad

Messages

Author

Time

Freaking oil drain plug won't turn. Made a very easy oil change into an ordeal. Any ideas how to get it off?

byuluvr On My Way

Feb 1, 10:09am

Let me guess.... You went to a quick Lube type establishment for the last oil

VACOUGFAN

Feb 1, 10:10am

That's the worst thing. I did it myself. I only hand tightened it so it should come off easy.

byuluvr

Feb 1, 10:12am

Are you using a 6 point socket or 12 point?

VACOUGFAN

Feb 1, 10:15am

Doh! You got me. I switched to a 6 point and it came off (not easily).

byuluvr

Feb 1, 10:44am

Next dumb question... Are you sure you're turning it the right way?

VACOUGFAN

Feb 1, 10:25am

You mean left way.

TeeKaa

Feb 1, 10:48am

I mean the correct way.

VACOUGFAN

Feb 1, 12:25pm

Do you have a way to heat it? You don't normally want hot oil pouring out on you but heat tends to loosen things

Pete

Feb 1, 10:11am

Happened to me a few years ago.

dut99002

Feb 1, 10:12am

<< Deleted >>

kcca

Feb 1, 10:22am

WD-40 is garbage for the record...

VACOUGFAN

Feb 1, 10:12am

Vise grips? Is the bolt head stripped?

BleedCougarBlue2

Feb 1, 10:13am

It wasn't to start but by the end my socket which fit perfectly no longer does.

byuluvr

Feb 1, 10:14am

So you stripped the plug? Did you use the correct size socket?

Zak

Feb 1, 10:16am

I'd recommend he take it to a mechanic to do that. Lot can go wrong if one

VACOUGFAN

Feb 1, 10:19am

I have an extender for my socket.

TLCougar

Feb 1, 10:14am

Forget changing the oil. Just change the car every 3,000 miles.

Feb 1, 10:18am

Freaking rich CBers!!

DizzyDean

Feb 1, 10:23am

Finally some sense spoken around this place

Born2Fish

Feb 1, 11:22am

If it's stripped, you do a few things:

txblue

Feb 1, 10:26am

Worst-case scenario is that you have to replace the lower oil pan. Definitely a

AggieWeekendCougar

Feb 1, 10:31am

It definitely could still be cross threaded. When he said hand tightened, I

byusage

Feb 1, 11:23am

JB weld your socket onto it. Give it 24 hours to dry. Then you should be able to take it off with all the power you can

Tesla Coug

Feb 1, 10:47am

Go to Burt Brothers and ask them to loosen it real quick

Bussin'

Feb 1, 1:04pm

Report problem with this ad

Posting on CougarBoard

In order to post, you will need to either sign up or log in.

Report problem with this ad